How to Root & Install Custom Recovery On Motorola Droid Razr With One Click

• Tweet

• Tweet

As per the DroidLife’s guide now you all know that using the exploit especially for the Droid 3 can Root the Motorola Droid Razr. This has been covered in the guide already.For most of the people it didn’t work as per the feedback received on the earlier posts. But it is still not verified whether it will work for all or not.Nevertheless, FraseTag the Forum member of XDA-Developers has launched the single click Root solution which has a slightly customed recovery as well, which is actually good for the users.

This tool will work with Razr XT910 & also with XT912.  In the last few weeks like before and as per the trend always, the most admired Zergrush exploit is employed by this root. So here we salute the Doomlord for this. The recovery is same as the recovery which has been in case of the Droid Bionics recovery where it worked in favor of the Atrix 2 which is somewhat done and had its own limitations. The restoration of the program might be of some risk so it is better that you have the backup. Also the capability of the flash Zip Packages is not known up till now.  You must keep in mind that there is no file like SBF which you could use for either installing or flashing anything that is not right by the recovery procedure and to flash your phone back.

Disclaimer: In case the device you are using gets affected or suffers any kind of damage or bricked during the procedure, then we are not liable for it. And please note that if you follow this then you would be held accountable.

Devices that you required for this procedure:

Motorola USB drivers

One Click Root + Recovery Package for Windows | Linux & Mac

Steps to Root & Install Custom Recovery On Motorola Droid Razr With One Click

1.    To begin with first you have, the above given link from where you have to retrieve the package installed.
2.    You must enable USB debugging in your device.  (Settings > Applications > Development).
3.    From the previously extracted package you will find Rumme.bat after which in case you are on windows you will have to link your device to the PC and then run it.
4.    If on Linux unfold the terminal & look out for the extracted folder. Next press the command given below:

5.    For MAC users:

6.    You must remember that you mustn’t remove the connection as the phone completes reboot, also the recovery is back installed to what it was.
7.    Now remove the connection and finally the app of recovery on your device.

Finally you are all set and done with everything .

Article Labels: motorola razr recovery, android boot manager xt910, motorola xt910 honeycomb, motorola xt910 root en linux, root droid razr macbook